Overview

A hard wearing, water-based, Satin with innovative technology for both interior and exterior use. Formulated to have excellent durability and offer superb colour retention for a longer lasting finish. A high quality, quick drying and non-yellowing, high sheen paint ideal for interior and exterior trim including skirting boards, architrave, and door and window frames.

Formulated as a three coat system using Aqua Primer Undercoat as the first coat. Designed with the trade decorator in mind the requirements of a top quality trim paint have been fulfilled.

• Non yellowing, long lasting paint
• Excellent durability, ideal for high traffic areas
• Part of a 3 coat system
• Fast drying and quick recoat times
• High cover power

Preparation

For the best results always thoroughly prepare the surface. Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax.

• On previously painted and glossy surfaces remove all loose or flaking paint and rub down with an abrasive paper.
• Areas affected by mould should be treated with a suitable .
• Bare steel - remove any rust and dirt and apply .
• Pressure treated timber - should be weathered for at least six months prior to painting.
• Weathered wood - should be abraded to allow for maximum penetration.
• New planed, finished wood or PSE wood - should also be abraded to open the grain and allow maximum penetration.
• Block any staining or any knots with .

Application

We always recommend testing a small inconspicuous area to ensure you are happy with the finished results.

• Stir well and only apply when temperatures are above 8°C.
• Apply by brush, roller, conventional H.V.L.P or airless spray, do not over spread.
• Spraying will considerably reduce the coverage rate depending on the type of spray equipment used.
• Apply two to three coats, allowing each coat to dry for four hours before applying the next.

Aftercare & Storage